FREQUENTLY ASKED QUESTIONS ABOUT WINDSHIELD REPLACEMENT

Frequently Asked Questions About Windshield Replacement

Frequently Asked Questions About Windshield Replacement

Blog Article

There is nothing like avoiding life threatening accidents on the daily commute only to have a rock damage your windshield. Auto windshield replacement can be done in minutes. If the damage can be repaired before it spreads and becomes too severe, the windshield may not have to be replaced. It can be repaired by a professional or the owner can do it themselves. After the deductible is paid the insurance will cover the cost.

Very automobile windshield chip repair few roads were paved in those days. Most of their travel was on two-lane dirt roads through the country. She and her brother liked to reach out the window and pull leaves off low-hanging branches as the car sped along at fifteen miles an hour. The trip to her grandmother's house, which would take about three hours today, was a day-long journey back then.



For that reason, many companies will happily waive the deductible if the existing windshield can be repaired. So you may be able to have that chip or crack fixed without paying anything at all.

If you do decide that windshield repair near me is your best bet, you have a few choices. First of all, make sure you check to see if your insurance covers it. In a lot of instances it does. The problem is that many policies have a deductible that is higher than the cost of the replacement or repair job. If that is the case, you will have to pay for it yourself.

There are auto glass shops that offer mobile windshield repair to give you the best convenience. With such, you can have the auto glass technician to come to your place so you no longer have to bring your car to the shop.

A surface pit is a nick in the glass associated with normal wear and tear that does not penetrate to the plastic inner layer. This can be repaired if the damaged area has a diameter of not less than 1/8 inch.

To further strengthen the windshield, the auto glass is subjected to a tempering phase. The sheet is heated to a temperature of 1565 degrees Fahrenheit or 850 degrees Celsius. It is then subjected to blasts of cold air. A piece of PVB plastic is sandwiched between two pieces of auto glass. The sandwich is heated inside an autoclave. This bonds the components together tightly and removes any trapped air.

Report this page